<< Back to The Big Trak Homepage
Next Page
Ok here we go! First things first, make sure you have plenty of space to work,
a medium phillips head screwdriver, a small flat head screwdriver, a pair of pliers,
and a soldering iron.
1. Remove Bigtrak's front wheels by pulling on the white plastic wheel cover.
The front axle will also come out with it (not pictured)
Do the same for the back wheels, and remove the wheel cover bar.
Be very careful, the axle mouldings are fragile - bust them and you're stuffed!
Note how the center drive wheels have slots in them, to engage with the drive bar. (pictured right)